If installed by one of our trained installation experts at an authorized Dealer or Service Center, the Permashield™ Tire Sealant will NOT cause a wheel imbalance. It is important that all wheels and tires are balanced prior to the installation of the product. In many cases, the sealant improves the driving experience and hydrodynamically balances the tires. Over time, as normal wear and tear occurs on a tire, the product actually works to improve the ride comfort.

While it is possible for the Permashield™ Tire Sealant to seal punctures in a tire sidewall, for all passenger vehicle and high speed vehicle applications we recommend that any sidewall puncture be inspected by a tire safety professional. It is important to understand that the construction of a tire’s sidewall is very different from the construction of the tread area, and there are structural and safety considerations that make it outside of our product performance guarantee.

The Permashield™ Tire Sealant has been extensively tested and is certified to -40 degrees F without freezing. It also remains stable and effective at temperatures up to 150 degrees F.

Yes. Unlike many of the competitor products, any tire with the Permashield™ Tire Sealant installed does not cause it to be unrepairable or unretreadable. The product is water soluble and may also be removed with a simple hose to allow for any needed repairs or retreads.

Yes. In a case where a screw has caused a puncture, the sealant will form a protective coating around the threads. The tire will continue to perform as normal with the screw inside, permanently sealed. We recommend that it not be removed from the tire. The head of the screw will wear off as the vehicle is driven and it will not do any damage to your tire. Most drivers will never even realize they ran over a screw because their tire will not lose air pressure.

If driving with a screw inside your tire makes you uncomfortable, or if multiple screws are embedded in the tire causing an imbalance, you may simply have them removed by a tire professional. In most cases, the hole created when removing the screw will seal itself. However, if removal of the screw results in a large hole or a jagged tear in the tire, it may require a patch. Always consult the tire manufacturer safety guidelines before patching or repairing any tire. Any manual removal of the screw that results in damage or an unsealable hole in the tire is not covered under our product guarantee.

We are aware of no major tire manufacturer warranty that is affected by the use of the Permashield™ Tire Sealant. In most cases, the sealant improves the performance of the tire and extends its useful life.

We have never had a TPMS failure caused by the use of our product. In the event that our product caused the TPMS to fail, it would be covered under our product guarantee.

Typical installation takes less than 15 minutes.

The Permashield™ Tire Sealant is non-toxic, non-hazardous, and non-combustible. Not only does it comply with all Toxic Substance Authority requirements, but many of its ingredients are commonly found in food products and other household items. All of the Permashield™ Tire Sealant products also include rust inhibitors that prevent the product from causing any corrosion or degradation of wheels and modern, sealed internal tire pressure monitoring sensors (TPMS).